$14.95 - $14.99
Wolf Tooth designed these bolts to be the best on the market. They have a 4mm hex socket and are 10mm long so you can use a bash ring with your chainring that has threaded standoffs like the Wolf Tooth 104 BCD 30t ring, Elliptical 104 BCD rings, 76 BCD rings and others. No nuts are included with these bolts as they are intended for use with threaded chainrings. These work great with Wolf Tooth or any other brand threaded M8 x 0.75 chainrings.
$99.00 - $99.99
The radical look and feel of SRAM's X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. They subjected every size of chainring to untold environmental and mechanical tortures, abuse and neglect, in both lab and real-world settings, to come up with a chainring that would augment the Eagle drivetrain’s performance in all conditions. The longer, positive-rake tooth shape has been designed to work perfectly with the Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise and wear.
The Pursuit Special is All-City's addition to the pantheon of high end track chainrings. They were designed in house by track racers for track racers and are optimized for weight, stiffness, and engagement. These beauties are cnc’d in the USA and utilize a proprietary tooth profile for smooth and quiet operation. The 49-52’s utilize a solid body design with reliefs in the back for weight savings, while the 46-48’s have full cutouts. In sticking with the theme of their aluminum track bike, the Thunderdome, All-City named these rings after Mad Max’s car, the Pursuit Special. - Material: 7000 Series Aluminum - Ring Position/Type: Single
Replacement chainring in 130mm BCD for SRAM 11-speed Yaw speed road cranks. Replace worn out rings or swap to change gearing for specific uses. - Top quality design and materials in sizes to fit modern road and 'cross bikes. - 7000 series aluminum provides strength and durability
$23.37 - $57.54
Original equipment on SRAM and Truvativ cranks, they also work well with other drivetrains. - 7000 series aluminum provides strength and durability - 130mm BCD
Original equipment on SRAM and Truvativ cranks, they also work well with other drivetrains. - Middle chainring, use with 48T outer - 64mm BCD
$15.00 - $90.00
Original equipment on SRAM and Truvativ cranks, they also work well with other drivetrains. - Material: Aluminum
Shimano XTR CRM91 1x11 Chainrings - Hollowglide technology provides exceptional driving stiffness and strength - Titanium, carbon, and aluminum materials - Titanium teeth for lightweight durability - Modified tooth profile prevents chain drop - Ring Position/Type: Chain-retaining single ring - Drivetrain Speeds: 11 - Chainring BCD: 96 Shimano Asymmetric
FSA Pro Track Chainrings are CNC Machined AL7075/T6 with laser-etched logos. - Requires 1/2" x 1/8" chain
$29.99 - $99.99
The all new Turbine 11 Speed rings are ready to ride. Completely redesigned from the ground up, these rings shift like nothing else. The Turbine rings are machined from 7075 aluminum, so they are built to last. Rings are CNC'd from 7075 alloy, creating a ring with instantaneous smooth and quiet shifting, even under load. These 2x rings are super stiff at a minimal weight, resulting in a ring that demonstrates sharp and quick shifts while being highly resistant to impacts.
Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings. - Compatible with 9, 10, 11, and 12-speed - Narrow Wide tooth profiling ensures consistent chain retention - Lockring installed/removed with ISIS BB tool - Stiff 4mm plate thickness to transfer loads without flexing
$52.99 - $171.99
- X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - New tooth profiles for improved wear - More durable finish - 94mm BCD
$46.99 - $79.99
- Asymmetric four arm shape for greater stiffness in the power zones of the pedal stroke - Compatible with 9/10/11 speed chains, mounts using a common Park BBT-22 tool
The X-SYNC 2 Bosch Direct Mount Chainring is built with the needs of E-MTB riders in mind, and incorporates the same X-SYNC 2 Eagle chain management technology found in every SRAM 1x drivetrain. - Sharp, narrow tooth profile and rounded chamfer edges help manage a deflected chain - Mud-clearing recesses - An integral component of the SRAM 1x drivetrain - Speeds: 12 - Material: Steel
Race Face Next SL Direct Mount Chainrings • 7075-T6 aluminum, aerospace grade strength • Compatible for 9, 10, and 11 speed • Narrow Wide tooth profiling ensures ultimate chain retention • Attaches as part of the Race Face CINCH system (using tool TL6800) allowing you to switch between Direct Mount rings/spiders with ease • Utilizes Race Face proprietary spline design • Stiff 4mm plate thickness to transfer loads without flexing • 41 grams (26T) ranging up to 82 grams (36T) • Compatible with Race Face cranks with CINCH system interface
The SRAM X-Sync STEEL 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-SYNC technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price. - Drivetrain Speeds: 10 , 11 - Material: Steel - Ring Position/Type: Single - Weight: 110 grams (32t), 96 grams (30t),
The EX1 drive train was designed specifically for the demands of electric-assist mountain bikes: a wide gear range with bigger jumps between gears and sturdy components to handle higher torque loads. Liberal use of features found on SRAM’s high end MTB parts provide high value, quiet operation and ease of service. - X-Sync (wide-narrow) tooth profiles for great chain management - Compatible with Bosch mid-drive E-bike systems - Material: Steel - Size/BCD: Direct mount - Recommended Group: EX1
$40.00 - $48.00
These CNC’d lovelies will work just fine in a multi-ring setup, but they’re not equipped with shift ramps or pins, which makes them perfect for single-ring drivetrains. - Longevity, performance, and quiet operation - Material: CNC-machined 7075-T6 Aluminum - Chain Compatibility: 8-, 9-, or 10-speed compatible
$238.00 - $344.00
Shimano Dura-Ace 9000 11-Speed Chainrings. - Chainring BCD: 110 Shimano Asymmetric - Color: Silver/Black - Defined Color: Silver - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Outer
- SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - X-Range gearing technology gives you more range and a smoother gear progression, so you’re always in the right gear - Improved aerodynamics for time trial and triathlon - Material: Aluminum
$31.99 - $42.99
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.
Shimano Sora 9-Speed replacement chainrings gets your drivetrain operating smoothly again.
Shimano STEPS E8000 chainrings are specially designed for STEPS drivetrain systems. - For use with E-Bike rear derailleur system compatible chain - Chainring for 50mm chain line
SLX SM-CRM75 stiff and lightweight chainring delivers smooth pedaling over bumpy terrain. The SM-CRM75 chainring features SHIMANO DYNAMIC CHAIN ENGAGEMENT+ technology, which features special gear teeth profiles that deliver exceptional chain engagement and chain retention. - Special MTB gear teeth profile improves chain engagement and retention - Exchangeable single/double chainring - Crankset can be used as common component - Superior chain retention - Rider tunable
$238.00 - $348.00
The Shimano R9100 series crankset achieves the ultimate in optimal power transfer. It does this through a more reinforced outer chainring on its unique asymmetrical four-arm spider construction. - Chainring BCD: 110 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Outer
- Ring Position/Type: Inner - Drivetrain Speeds: 11 - Chainring BCD: 64 Shimano Asymmetric - Material: Aluminum
$13.99 - $33.99
Shimano SLX M7000 10-Speed chainrings get worn out drivetrains back in like-new condition.
$69.99 - $95.99
Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.
SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.
Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. There are 3 offsets: - Standard: 47mm chainline, 6mm offset for cyclocross and road cranks - Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 - Boost: 52mm chainline, 3mm offset - BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset - If you have a BB30 crankset (30mm diameter Aluminum Spindle) this measurement will determine whether it is a long or short spindle:
Page 1 of 6 Next page