• 
      

Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

KMC MissingLink Connector
$3.99 - $51.99
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
Problem Solvers Cassette Spacer
$7.99 - $8.99
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.
Problem Solvers Handlebar Clamp Shim
$9.99 - $17.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
Shimano In-Line Brake Cable Adjuster
$28.99
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.
Sunlite Dog Leash
$36.99
A well-exercised dog is a happy dog, so give Fido a good workout while you ride! Sunlite's Dog Leash consists of a metal bar that mounts under the rear axle bolt or quick-release and straps to your chainstay. This keeps the center of gravity low so you stay stable if your dog pulls to one side. The bar is long enough to keep your pup away from the bike, too.
Problem Solvers Cable Doubler
$66.99 - $90.99
The Problem Solvers Cable Doublers are made of light, durable machined and anodized aluminum and they are Teflon coated for a super-smooth cable pull every time. They come in two models. The first allows you to control two brakes with one lever. The second allows you to control one brake with two levers. Why? Well, there are myriad applications: tandems, cyclocross bikes, fixies, tricycles, recumbents, cycles for those with special needs, bike polo bicycles, those 4-person bikes you see on beach boulevards, and so on. You could even link both models of Cable Doublers together for the ultimate in redundancy!
Sunlite Chromoly Quill Stem Extender
$22.99
When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.
Wheels Manufacturing Inc. Derailleur Hanger 338
$41.99
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Norco Part #913005-001 - Attaches to frame with (1) M4x8 flat head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. 31.8 – 25.4 Handlebar Shim
$18.99
Shims for fitting 25.4mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 25.4mm - Length: 48mm - Machined Aluminum - Anodized Black
Specialized Ohlins RXF 36 Fork Spring
$95.00
The Ohlins RXF 36 Coil Fork Spring sets a new benchmark for spring rate accuracy and light weight for trail and all-mountain fork springs. - Ultra-fine spring rates to ensure perfect set up for all weights. - Spring rates are broken down to 0.9 N/mm (5 lbs./in). - Fits Ohlins RXF Coil fork only.
Specialized Ohlins 7.75-Inch Stumpy Spring
$95.00
The Ohlins Stumpjumper Spring sets a new benchmark for spring rate accuracy and light weight for steel springs. - Ultra-fine spring rates to ensure perfect set up for all weights. - Spring rates are broken down to 4 N/mm (23 lbs./in). - Fits Ohlins TTX shock absorber for Stumpjumper FSR only. - Made with proprietary ultra lightweight steel, it's incredible for keeping your build weight down for trail riding.
Specialized Ohlins 8.25-Inch Enduro Light Spring
$95.00
The new generation spring series features a race-ready weight with big mountain strength. You'll also find advanced technologies that feature a multi-step surface treatment process, as well as cutting-edge heat treatments. Lastly, we use wire materials that allow us to stress the wire harder, without causing damage to the spring, and therefore design lighter springs. - Precise spring rates are broken down to 4 N/mm (23 lbs./in).
Wheels Manufacturing Inc. Derailleur Hanger 354
$49.99
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Fuji part #D034 - Attaches to frame with (1) M4x8 Flat head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 353
$49.99
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Fuji part #D027 - Attaches to frame with (2) M4-12 flat head screws (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 351
$49.99
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces GT part #KG0007N02 - For Shimano Direct Mount derailleurs - Attaches to frame with (1) M4x16 Flat head screw and (1) M4-16 socket head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 347
$49.99
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Attaches to frame with (2) M4x8 Flat head screws (sold separately) - CNC machined 6061 aluminum - Black anodized finish Replaces: - Ghost part #EZ1859 - Lapierre part # 32-57-145 (02013145)
Wheels Manufacturing Inc. Derailleur Hanger 345
$49.99
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Raleigh part #32-68-231 - Attaches to frame with (1) M4x12 Socket head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish - This hanger is not interchangeable with Diamondback Part # 32-68-060 (DROPOUT-291)
Wheels Manufacturing Inc. Derailleur Hanger 331
$41.99
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Scott Part #235286 - Attaches to frame with (2) special M5x10 screws (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 325
$50.99
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Giant Hanger #RE270A - For standard mount derailleurs - Attaches to frame with (2) M4x14 flat head screws (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. 1-1/8-inch Headset Spacer Kit
$160.00
105 piece assortment of 1-1/8-inch aluminum headset spacers. Kit includes: - 1.5mm (Silver) qty. 15 - 2.5mm (Silver) qty. 15 - 5mm (Silver) qty. 15 - 7.5mm (Silver) qty. 5 - 10mm (Silver) qty. 5 - 1.5mm (Black) qty. 15 - 2.5mm (Black) qty. 15 - 5mm (Black) qty. 15 - 7.5mm (Black) qty. 5
Specialized Ohlins 9.5-Inch Demo Light Spring
$95.00
The new generation spring series features a race-ready weight with big mountain strength. You'll also find advanced technologies that feature a multi-step surface treatment process, as well as cutting-edge heat treatments. Lastly, we use wire materials that allow us to stress the wire harder, without causing damage to the spring, and therefore design lighter springs. - Precise spring rates are broken down to 4 N/mm (23 lbs./in).
Wheels Manufacturing Inc. Grade 300 Loose Ball Bearings
$22.99 - $23.99
Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 300 — Ultegra level quality.
Sunlite Cartridge Bearings
$11.99 - $27.99
- DT Swiss cartridge bearings - Sold in pairs
Sunlite Double Rail Saddle Clamp
$9.99
- Universal design double rail saddle clamp
Sunlite Derailleur Hanger
$7.99 - $24.99
- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact
Sunlite Seat Binder Bolt
$6.99
- Chrome allen seat binder bolt
Shimano XTR M9000 Rear Derailleur Pulley Set
$41.99
Get that nice derailleur shifting smoothly and operating silently again with a Shimano Rear Derailleur Pulley Set. - OEM pulley set for XTR RD-M9000 - Sealed bearing guide & tension pulley - Guide pulley with extra long teeth for increased chain control
Shimano XTR M9000 Rear Derailleur Bracket Axle Unit
$33.99
This is a rear derailleur mount link for Shimano's XTR M9000 rear derailleur. A straight link is essential to optimal shifting performance and reliability.
Shimano M9000 Hose Cover
$2.99
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever
Shimano Dura-Ace R9100 Rear Derailleur Bracket Axle Unit
$35.99
This is a rear derailleur mount link for Shimano's XTR M9100 rear derailleur. A straight link is essential to optimal shifting performance and reliability.
Salsa Alternator 2.0 Dropout Right Plate
$30.00
Alternator 2.0 is the latest iteration of Salsa's adjustable dropout system. Alternator 2.0 Dropouts are a modular system consisting of replaceable dropout plates and fixing hardware. They are specifically designed for, and only compatible with, Salsa frames using the 2.0 system. - Alternator 2.0 Dropout plates are compatible with frames featuring 142, 148, 177, or 197mm spacing - Hardware kits (sold separately) must always be paired with the style of dropout plates being installed on the frame - Allows for the rear axle location to be adjusted through a ~17mm range relative to the bottom bracket axle - Note: This part number only includes a single Alternator 2.0 plate
Salsa Alternator 2.0 Hardware Kit
$4.99 - $5.99
Hardware is specifically designed for, and only compatible with, Salsa frames using the Alternator 2.0 dropout system. - For use on 2017 and newer alternator 2.0 Adjustable plates only - Please reference hardware kit FS2351 for fixed position plates - Please reference hardware kit FS2350 for adjustable plates
Salsa Alternator 2.0 Left Dropout Plate
$30.00
Alternator 2.0 is the latest iteration of Salsa's adjustable dropout system. Alternator 2.0 Dropouts are a modular system consisting of replaceable dropout plates and fixing hardware. They are specifically designed for, and only compatible with, Salsa frames using the 2.0 system. - Alternator 2.0 Dropout plates are compatible with frames featuring 142, 148, 177, or 197mm spacing - Hardware kits (sold separately) must always be paired with the style of dropout plates being installed on the frame - Allows for the rear axle location to be adjusted through a ~17mm range relative to the bottom bracket axle - Note: This part number only includes a single Alternator 2.0 plate
Salsa Frame Plugs
$4.99
Frame Plugs for Internal Cable Routing
SRAM X01 Eagle Pulleys and Inner Cage
$80.40
Original equipment rear derailleur pulleys and inner cage for SRAM X01 Eagle rear derailleurs.
Jagwire Pro Compressionless Brake Housing
$59.99
Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. - KEB-SL - linear strand, Kevlar reinforced, compressionless brake housing with Slick-Lube liner - Perfect for full-housing, high-performance bikes with mechanical disc or rim brakes - 20 black alloy lined end caps, 10 black POP end caps included
SRAM Flat Mount Disc Caliper Bracket Bolts
$10.99 - $28.99
Flat Mount Disc Caliper Bracket Bolts
SRAM Stealthamajig Hydraulic Disc Brake Hose Fitting Kit
$24.99
Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
SRAM BB30 Spindle Spacer Kit for BB386
$10.00
Spindle spacers and kits allow BB30 cranks to be used in a variety of BB shells. - Use this kit to install these SRAM and Quarq BB30 road cranks in BB386 frames: Force 22, S900, S950, Red power meter, DZero Carbon, DFour, Elsa, Riken
SRAM All-Mountain Carbon Chainring Guard
$92.00 - $100.00
SRAM X01 Chainring Guards - Material: Polycarbonate - Chainring BCD: 94 - Mount Type: Chainring
SRAM XX1 Eagle Ceramic Bearing Pulleys and Inner Cage
$88.00
Original equipment ceramic bearing pulleys and inner cage for SRAM XX1 Eagle rear derailleurs.
Cane Creek 110-Series Headset Top Cover
$30.00
Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values. - Bearings not included - Stack height = 9mm
Cane Creek OPT Climb Switch Handlebar Remote
$54.99 - $69.99
The OPT remote allows instant engagement of Cane Creek's Climb Switch on Double Barrel rear shocks, giving the rider precise control of traction and climbing feel. - Hard anodized for durability - Requires brake cable and housing for installation - Bottom mount for below bar engagement or top mount for above bar - Compatible with DBinline, DBAir IL, and DBCoil IL shocks only
Cane Creek Rear Shock Hardware
$19.50 - $31.99
Mounting hardware fits a variety of Cane Creek shocks.
Cane Creek Slamset Headset Top
$63.99
Slamset top headsets are designed to keep the stack height low. - Hellbender bearings with improved seal structure
KMC Missing Link 11-DLC
$24.99
- Compatible with Shimano, SRAM, Campagnolo and KMC 11 speed chains - DLC Coated - Non-reusable - Opening Tool Required - Card of 2 pairs
Profile Design F-35 Armrest Pads
$24.99
Large surface area triathlon or TT aerobar armrest elbow pad with contoured edges to provide support and relieve pressure points. - F-35 Standard replacement pads are 16mm thick, built with moderate thickness to provide comfort in both training and race conditions - Made of EVA foam with anti-bacterial/anti-microbial Lycra cover - Compatible with F-35a Aluminum, F-35c Carbon, F-35i Injected, and F-35 Adjustable Armrests - Weight: 26g/pair
Profile Design J Bracket Kits Set of 2
$69.99
J Brackets Kits customize stack height, extension position, and ride position of Profile Design Aerobars. - The J2 Bracket has an adjustable clip-on system with the armrest bracket isolated from the basebar bracket; providing a wide variety of for-aft adjustment of the aerobar and armrest position, stack height, and width adjustment - Standard on all T Plus Aluminum Aerobars - Made of Forged and CNC 6061-T6 Aluminum - Clamp diameter: 31.8mm bracket, 22.2mm extension - 12.9-grade bolts for added strength and corrosion resistance
FSA BB30 Inner Snap Ring Set
$10.99
Snap rings are pretty ingenious, except they love to launch in an impossible-to-track direction when removing or installing. Maybe you should keep a spare set of these BB30 Inner Snap Rings, just in case.
Bontrager Madone Chainstay Rubber Gasket
$2.99
Product details - Use in chainstay pocket to seal sensor into frame
Origin8 Alloy Locking Bar End Plugs
$13.99
- Expanding replacement bar end plugs with hex bolt - Anodized alloy end caps - Compatible with most handlebar styles - 18.2mm OD expander/25.5mm OD end cap
Origin8 Alloy Road Push-In Bar End Plugs
$17.99
- Push-in replacement CNC alloy bar end plugs - MTB-specific design - Anodized alloy end caps - Compatible with most handlebar styles - 20mm OD plug/25mm OD end cap (Road) - 20mm OD plug/30mm OD end cap (MTB)
Origin8 Threaded Lock Nut - Bag of 10
$25.99
- Top lock nut for threaded headsets - Includes water seal - Bag of 10 Lock Nuts
Ritchey Break-Away Downtube Hinge Clamp
$19.95 - $89.95
Replacement frame parts and hinge clamps for Ritchey Break-Away frames. - 45.0mm Hinge clamp compatible with boom tube of Break-Away Tandem
Ritchey WCS Alloy 1-Bolt Seatpost Clamp 7 x 7mm Rails
$23.99
Saddle Rail Clamp outer-pieces to adapt WCS Alloy 1-bolt posts to various saddle rail dimensions. - To retrofit WCS One-Bolt Alloy Seatpost - Material: 7050 alloy - For 7x7mm saddle rail size
Ritchey WCS Alloy 1-Bolt Seatpost Complete Clampset 7 x 7mm Rails
$24.99
Complete clamp kit to adapt WCS Alloy 1-bolt posts to various saddle rail dimensions. - To retrofit WCS One-Bolt Alloy Seatpost - For 7x7mm saddle rail size
Ritchey WCS Alloy 1-Bolt Seatpost Complete Clampset 8 x 8.5mm Rails
$24.99
Complete clamp kit to adapt WCS Alloy 1-bolt posts to various saddle rail dimensions. - To retrofit WCS One-Bolt Alloy Seatpost - For 8x8.5mm saddle rail size
Ritchey WCS Replacement Stem Bolts: C260 Stem
$14.99
Replacement bolts for Super Logic stems. Original equipment stem hardware ensures exact fit and finish. - Bit Size: Torx 20 - Thread Pitch: M4 - Length: 15mm
Wheels Manufacturing Inc. Grade 25 Loose Ball Bearings
$16.99 - $17.99
Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 25 bearings are Dura-Ace or Campagnolo Record quality.
Wheels Manufacturing Inc. Repair Pack for 24mm (Shimano) Bottom Brackets
$10.00
Replacement spacer pack for Wheels Mfg. 24mm (Shimano) bottom brackets. Bearings sold separately. Pack Includes: - (2) - Silicone Dust Seal, 24mm ID - (2) - 0.5mm, 24mm ID Crank Spindle Spacer - (2) - 1.0mm, 24mm ID Crank Spindle Spacer
Page 1 of 16 Next page