Built to handle the rigors of riding off-road, the concave shape and tall pins of the Thump composite pedal provide the perfect balance of traction and comfort for a range of applications. The Thump RP version comes with replaceable steel pins that provide solid traction when the trail gets hairy. Two different platform diameters accommodate a range of shoes sizes for a more personalized fit. - Tough nylon composite body - Chromoly spindles, sealed cartridge bearings, and nylon bushings - Body: 18.5mm thick with 2.5mm of concavity for great control and comfort - Pin height: 3mm out of the box. Remove the 2mm washer under the pin head to convert to 5mm pin height. - Platform size: 113 x 95mm
Choose to ride flat or clipped in for city commutes and casual rides around town. This hybrid composite pedal with its 2-sided entry allows you to do both. It features premium bearings and a double seal system, diamond plate pads for traction, and molded pins and ribs for grip. - Premium brass cleats with shims included - Q-factor: 57mm - Release angle: 15° / 20° - Forged 435 Chromoly steel spindle - 300 series stainless steel spring - 5-year warranty - 331g per pair
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
• Galvanized steel pedal body • 2-piece block platform • Boron axle • Plastic blocks w/ integrated reflector • 553g pair
• Rubber platform increases comfort and grip • With reflectors
• One piece alloy body with rubber surface for grip • Chromoly spindle • 574g pair (9/16")
• Polished one-piece alloy body • Boron spindle • Toe clip compatible • Approximately 450g pair
• One-piece resin body • Chromoly spindle • Toe clip compatible • 366g pair • 1/2-inch spindle
$55.99 - $57.99
Sometimes after a a few seasons of punishing riding through mud, sand, and dust, your pedals need a little love to get them spinning smoothly again. iSSi's Spindle Rebuild Kit includes everything you need to get your iSSi pedals spinning just like new. Includes: • chromoly spindles • sealed bearings • bushings • spindle nuts • seals • iSSi branded end caps
- Set of 44 total replacement steel pins for vault pedals - Run threads-Out for maximum traction or flip the pins to heads-out for less grip - 16 Short pins (For use in the center) overall length 8.5Mm, stud is 4.5Mm - 28 Long pins (For use in the outside edge) overall length 12.5Mm, stud is 4.5Mm - Use either a 5mm spanner or the included 2mm hex wrench to secure/remove
For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair
$100.99 - $110.99
The iSSi Road Carbon Pedals provide large platforms for excellent power transfer and stability. Bushing and sealed cartridge bearings add durability, while the Chromoly spindles resist corrosion for long life. - Simple installation with a 8mm hex key - Available in standard spindle length or +5mm - +5mm model only available in Intense Black - Stainless Steel cleat plate provides a solid pedal interface - Adjustable spring tension - 7° float, 3-bolt split-cleat included - Cleat Interface: Look KeO - Material: Carbon - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Single Sided Clipless - Spindle Material: Chromoly Steel - Weight: 266 grams
Dimension City Pedals. - Built-in reflectors, will not accept toe clips - Molded nylon; 1-piece, caged-type pedal - Slip-resistant surface
Dimension Mountain Pro Pedals. - Forged aluminum body - Sealed bearings - Accepts toe clips - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 270 g
Dimension Cruiser/Comfort Pedals. - Forged aluminum platform-type body with slip-resistant surface and built-in reflectors - Platform size is 105.5 x 74mm - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 448g
• Aluminum body with rubber • Chromoly spindle
$80.00 - $84.99
There’s no need to choose between clipless performance and platform versatility with iSSi's Flip II pedals. Go clipless on the commute or sport clogs on campus. - Flip II: 56.5mm spindle length - Wear 2-bolt style cycling shoes or casual flat shoes - Compatible with iSSi, Shimano SPD and Wellgo 98A cleats - Chromoly spindle, ED-coated - Standard 15mm wrench flats as well as 8mm hex broach - Black chrome hardware - Adjustable spring tension - 4° cleat float - 14.6° angle of release - Bushing/sealed bearing combination for low-maintenance durability - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch
- Genuine leather-wrapped chrome plated steel - Hardware included
• City/road half clips • With reflectors • No straps needed • Resin
• Steel • Quality leather straps included
- Super thin-profile platform pedal designed for freeride, BMX, and urban riders - Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction: 13.3mm height/105mm width - CrMo spindle axle with a smooth running, sealed inner bushing/dual-outer sealed bearing system - Weight: 315g
The Baldwin offers the best of both worlds, bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. - Weight: 332g CrMo - Body: 60661 CNC AL - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Cleat: XPEDO XPT (6° Float)
Extruded & CNC machined 6061 aluminum pedal body - 2 sealed bearings & 1 DU sleeve bushing - 9/16" CNC chromoly spindle - 98mm x 92mm x 14mm platform - Extra tall 7mm M4-10 SS replaceable pins for ultimate grip
CNC machined 6061 aluminum pedal body - 2 sealed bearings and 1 DU sleeve bushing - 9/16" CNC chromoly spindle - Ultra thin 100mm x 104mm x 16mm platform - Extra tall M4-10 SS replaceable pins - 380g per pair
- Pedal body made of ruggedly durable engineering grade thermoplastic - LSL sleeve bushing and sealed bearing - 9/16" CNC machined Chromoly spindle - 10 M3-8mm replaceable pins per side - Platform size: 113mm x 105mm - 350g per pair
iSSi's sealed system makes installation and removal of their Road pedal spindles quick and easy Available in either 50mm or 55mm spindle lengths.
The split-cleat system makes cleat swapping a snap – no need to worry about losing your cleat’s position. Available in three different float options to suit your style. - 0, 4.5 or 9-degree cleat options - Cleat bolts and washers included - 4mm hex wrench required to install
Origin-8's Look Delta Cleats are compatible with Look Keo-style pedals. They feature 9-degrees of float.
Origin-8's ProForm UL Pedals feature an ultra-light CNC-machined body and a thin 18mm platform height. Heat-treated chromoly axles and cartridge bearings are super durable for a long life, and replaceable pins let you customize your grip.
Origin-8's Ultim8 MTB Single Clipless Pedals feature adjustable SPD-compatible bindings on one side and standard cages on the other: the perfect combination for riders who ride with cleated cycling shoes and also sometimes with regular shoes. With sealed bearings and chromoly axles, the Ultim8's are durable and practical all-around pedals.