Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

700c, 27-Inch & 650c

Roval CLX 50 Rear Wheel
$1,400.00
First came our CLX 64. Then the 32s. And after racking up multiple wins in Grand Tours, Worlds, and everything in between, we knew that our best bet was to take the line to new heights, or well, new depths. We needed to design one wheel that was a true quiver killer. One wheel that had all the aerodynamic benefits of the 64 in a package that climbed like the 32, and that's where the all-new CLX 50 comes in. When we set out to create the CLX 50, we had clear goals in mind, create wheels that are 48 to 54mm deep, aerodynamically optimized, ultra-wide, and under 1400 grams. This meant that they'd have to borrow some weight savings techniques that we developed for the CLX 32, while taking some aero guidance from the CLX 64, if we were going to create what we like to call ""the unicorn wheel."" Even though the CLX 50 is similar in weight to many wheels in the ""lightweight"" category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CLX 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around, because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width. After finding the optimized rim shape that supported our svelte weight requirements, we opted to lace the rims, via 21 DT Swiss Aerolite spokes, to our Aero Flange (AF) hub with the legendary CeramicSpeed bearings and DT 240 hub internals. And when it was time for final testing validation, we were left with a 50mm-deep, 770-gram clincher wheelset that's not only 200 grams lighter than the competition's similar depth wheel, but is also measurably faster in every conceivable test than each wheel in its category. - Assembly Method: Hand-built - Brake Track Height: 12mm - Braking Surface: Carbon Fiber - Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve, SwissStop Black Prince brake pads - Nipple Type: DT Swiss Pro Lock hexagonal - Rear Hub: Roval AF1, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed - Rim Depth: 50mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss Ready - Rim Width: 20.7mm internal, 29.4mm external - Spoke Count: 21 - Spoke Pattern: Radial/Two-cross (2:1) - Spoke Type: DT Swiss Aerolite T-head - Weight: 770g
Roval Rapide CLX 32 Front
$1,100.00
When we set out to create a lightweight wheelset, we didn't want it to be "just another climbing wheel." We wanted to provide the lightest wheelset out there with the aerodynamic attributes of something twice its depth. One wheel that'll get you to the base of a climb quickly and up it as efficiently as possible, yet still be strong enough for day-to-day abuse. It was a tall order, but in the end, the CLX 32 gave us more than what we asked for. Our design process started with a low overall weight at the forefront, as we knew what weight we could hit with the information and technology we had available. With that weight in mind, we then turned our focus to aerodynamics and began an iterative process of designing and testing over 150 individual rims to find the optimal shape. These innumerable Computational Fluid Dynamics (CFD) models, Win Tunnel hours, and shots of espresso left us with a 32mm-deep shape that boasts more logged wind tunnel time than any other wheel in its category. Once we found the most aerodynamic shape, at the 32-millimter depth, we came back to the weight focus and proceeded to experiment with over 40 different layup methods to reach our desired weight. And this made the CLX 32 lighter and faster than every other competitor in the lightweight wheel category. For the CLX 32 clincher front, we mated the rim to our Aero Flange (AF) series hub with DT Swiss Aero spokes in order to create the best overall wheel system. This resulted in a 553-gram, 21mm-wide (internal width) front wheel with an extremely low inertia value. In cycling, inertia relates to the amount of force it takes to accelerate or decelerate, so wheels that are built with lightweight rims, like the CLX 32, result in a lower inertia value that creates a lively wheel that allows you to accelerate, decelerate, and change direction with less effort. But why so wide? Well, additional width does three primary things for a rim, it provides additional structural strength, it allows for a clean rim and tire interface when using wide tires (resulting in enhanced aerodynamics and faster rolling properties), and it better supports the tire in hard cornering. This boosts both predictable grip and confidence when things get twisty on the descents. Each CLX 32 clincher front wheel also employs the legendary CeramicSpeed bearings and comes with our padded wheelbag, quick-release, tubeless plugs, tubeless valve, and SwissStop Black Prince brake pads. - Assembly Method: Hand-built - Brake Track Height: 12mm - Braking Surface: Carbon fiber - Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve, SwissStop Black Prince brake pads - Front Hub: Roval AF1, CeramicSpeed bearings - Nipple Type: DT Swiss Pro Lock hexagonal - Rim Depth: 32mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss Ready - Rim Width: 20.7mm internal - Spoke Count: 16 - Spoke Pattern: Radial - Spoke Type: DT Swiss Aerolite T-head - Weight: 550g
Roval CLX 32 Rear Wheel
$1,400.00
When we set out to create a lightweight wheelset, we didn't want it to be "just another climbing wheel." We wanted to provide the lightest wheelset out there with the aerodynamic attributes of something twice its depth. One wheel that'll get you to the base of a climb quickly and up it as efficiently as possible, yet still be strong enough for day-to-day abuse. It was a tall order, but in the end, the CLX 32 gave us more than what we asked for. Our design process started with a low overall weight at the forefront, as we knew what weight we could hit with the information and technology we had available. With that weight in mind, we then turned our focus to aerodynamics and began an iterative process of designing and testing over 150 individual rims to find the optimal shape. These innumerable Computational Fluid Dynamics (CFD) models, Win Tunnel hours, and shots of espresso left us with a 32mm-deep shape that boasts more logged wind tunnel time than any other wheel in its category. Once we found the most aerodynamic shape, at the 32-millimter depth, we came back to the weight focus and proceeded to experiment with over 40 different layup methods to reach our desired weight. And this made the CLX 32 lighter and faster than every other competitor in the lightweight wheel category. For the CLX 32 rear clincher, we mated the rim to our Aero Flange (AF) series hub with DT Swiss Aero spokes to create the best overall system. This results in a 730-gram, 21mm-wide (internal width) rear wheel with an extremely low inertia value. In cycling, inertia relates to the amount of force it takes to accelerate or decelerate, so wheels that are built with lightweight rims, like the CLX 32, result in a lower inertia value that creates a lively wheel that allows you to accelerate, decelerate, and change direction with less effort. But why so wide? Well, additional width does three primary things for a rim, it provides additional structural strength, it allows for a clean rim and tire interface when using wide tires (resulting in enhanced aerodynamics and faster rolling properties), and it better supports the tire in hard cornering. This boosts both predictable grip and confidence when things get twisty on the descents. Each CLX 32 clincher rear wheel also employs the legendary CeramicSpeed bearings and comes with our padded wheelbag, quick-release, tubeless plugs, tubeless valve, and SwissStop Black Prince brake pads. - Assembly Method: Hand-built - Brake Track Height: 12mm - Braking Surface: Carbon fiber - Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve, SwissStop Black Prince brake pads - Nipple Type: DT Swiss Pro Lock hexagonal - Rear Hub: Roval AF1, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed - Rim Depth: 32mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss Ready - Rim Width: 20.7mm internal - Spoke Count: 24 - Spoke Pattern: Radial/Two-cross (2:1) - Spoke Type: DT Swiss Aerolite T-head - Weight: 730g
Roval CL 50 Disc Wheelset
$1,750.00
After designing the CLX 50s, we realized that an affordable, race-worthy carbon wheelset was nowhere to be found, until the CL 50 Disc was developed, that is. We paired our quiver-killing CLX 50 Disc rim with DT Swiss Competition round spokes, our Aero Flange Disc hubs with DT Swiss 350 internals, and steel bearings to deliver you an exceptional wheelset at a more than accessible price. Why disc you ask? With our disc-specific rims, you not only ditch the brake track, but you get a stronger, more impact-resistant rim. This comes at the hands of a disc-specific carbon layup that optimizes stiffness and keeps weight as close to its rim-brake brethren as possible. And all the while, you get incredible brake modulation and power in all conditions. Sharing rims with the CLX 50s, the CL 50s feature many of the benefits as their higher-end siblings. Even though the CL 50 is similar in weight to many wheels in the "lightweight" category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CL 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around, because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width. Now it was time for final testing validation. The result? A 50mm-deep, 1515-gram clincher wheelset that's race-ready and wallet-friendly. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval steel quick-releases, Roval tubeless plugs and valves, Front quick-release, 12mm endcaps, Rear quick-release, 142x12 thru-axle endcaps - Front Hub: Roval AFD1, Center Lock, sealed cartridge bearings, quick-release or 12mm thru-axle end cap - Front Spoke Pattern: Two-cross/Radial (2:1) - Nipple Type: DT Swiss Pro LockBrass hexagonal - Rear Hub: Roval AFD2, Center Lock, sealed cartridge bearings, DT Swiss 350 internals, 11-speed, quick-release or 142x12mm thru-axle end cap - Rear Spoke Pattern: One-cross/Two-cross (2:1) - Rim Depth: 50mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss-Ready - Rim Width: 20.7mm internal, 29.4mm external - Spoke Count: 21 front, 24 rear - Spoke Type: DT Swiss Competition Race T-head - Total Wheelset Weight: 1,515g
Roval CLX 50 Front
$1,100.00
First came our CLX 64. Then the 32s. And after racking up multiple wins in Grand Tours, Worlds, and everything in between, we knew that our best bet was to take the line to new heights, or well, new depths. We needed to design one wheel that was a true quiver killer. One wheel that had all the aerodynamic benefits of the 64 in a package that climbed like the 32, and that's where the all-new CLX 50 comes in. When we set out to create the CLX 50, we had clear goals in mind, create wheels that are 48 to 54mm deep, aerodynamically optimized, ultra-wide, and under 1400 grams. This meant that they'd have to borrow some weight savings techniques that we developed for the CLX 32, while taking some aero guidance from the CLX 64, if we were going to create what we like to call "the unicorn wheel." Even though the CLX 50 is similar in weight to many wheels in the "lightweight" category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CLX 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around, because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width. After finding the optimized rim shape that supported our svelte weight requirements, we opted to lace the rims, via 16 DT Swiss Aerolite spokes, to our Aero Flange (AF) hub with the legendary CeramicSpeed bearings. And when it was time for final testing validation, we were left with a 50mm-deep, 1375-gram clincher wheelset that's not only 200 grams lighter than the competition's similar depth wheel, but is also measurably faster in every conceivable test than each wheel in its category. - Assembly Method: Hand-built - Brake Track Height: 12mm - Braking Surface: Carbon Fiber - Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve, SwissStop Black Prince brake pads - Front Hub: Roval AF1, CeramicSpeed bearings - Nipple Type: DT Swiss Pro Lock hexagonal - Rim Depth: 50mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss Ready - Rim Width: 20.7mm internal, 29.4mm external - Spoke Count: 16 - Spoke Pattern: Radial - Spoke Type: DT Swiss Aerolite T-head - Weight: 607g
Page 1 of 1